Baum Plastic-Lined Pipe

BAUM Plastic-Lined Steel Pipe & Fittings

Spools
Our pipes are lined with paste-extruded PTFE. Depending on the nominal pipe size, we can produce pipes up to a total length of 6 meters.

Blind Flanges
Any piping needs cleaning connections and also additional connections. Blind flanges close these connections during regular service.

Crosses
The one-piece execution with PFA assures a perfect flow in all four directions.

Elbows 30° / 60°
The BAUM manufacturing technology with paste-extruded PTFE assures an optimum flow and a exact fitting of the paste liner at the elbow segment.

Elbows 45° / 90°
The BAUM manufacturing technology with paste-extruded PTFE assures an optimum flow and a exact fitting of the paste liner at the elbow segment.

Instrument-Tees
Also known as gauge connections, are the one-piece solution with PFA lining for the connection to your measuring devices. In case of narrow space, also useable as short tee.

Lateral tees 45°
The one-piece execution with PFA offers a low-resistance flow through the entire component by a streamlined geometry.

Reducers concentric
Concentric reducers are the universal solution for all changes of the cross-section. Depending on the nominal width, the reducers are lined with PTFE or with PFA.

Reducers eccentric
In case of horizontal installation, eccentric reducers enable the complete idling of pipe sections. Depending on the nominal width, the reducers are lined with PTFE or with PFA.

Reducing-Flanges
We have a custom-made solution for all transitions between the nominal widths. According to the reduction, lined with PTFE or PFA.

Tees
The one-piece execution with PFA assures a perfect flow in the base body and at the outlet. The manufacturing of our PFA-Tees is done by injection molding (Extruder). For tees with nominal widths larger than DN 100, we rely on our approved paste liner. Both manufacturing technologies assure a specially smooth and easy-to-clean surface.